Advertisement
IV. Enabling the RF Pass-Through Option Using MLAA and MLUA
1.
Launch the ML Administrator Application.
2.
Go to the RF Pass-Through options available in MLAA (highlighted in Figure 1, below).
3.
Change the RF Pass-Through User Control from [Disable] to [Enable] (Figures 2 & 3).
4.
Select [Write to EC] to change the setting (Figure 4), a message will be shown after the setting
is updated to System EC (Figure 5).
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A
1
3
5
2
4
19
Advertisement
