Procedures To Be Followed; Trouble Shooting; Technical Data; General Guarantee Conditions - Olsberg 36/019-2 Instruction Manual

Electric ventilation unit
Table of Contents

Advertisement

A
Wall- 15. m ounting strip
B
Front panel
C
Ventilation module
D
Sealing panel
E
Locking mechanism
F
Spring lock
G Floor plate
H
Top panel
Fig. 10

Procedures to be followed

• Do not block the free passage of convected air below
the appliance. Do not block the air intake below the
appliance!
• Do not block the free passage of convected air above
the appliance. Do not block the air outlet slots at the
top of the appliance!
• The Electric ventilation unit is conforming to valid
safety regulations. Repairs and service to the appli- 15.
ance must only be carried out by a competent electri- 15.
cian.

Trouble shooting

If the Electric ventilation unit should not work for any
reason, please first check the following procedures:
• Is the appliance plugged in?
• Are the circuit breakers in the distribution box loose
or defect?
• Are the rotary knobs in the OFF position?
• Is the slider open (Position 1)?
• Is the ventilation module sealed?
Our after- 15. s ales service team is of course always avail- 15.
able to help you.

Technical Data

Dimensions H x W x D .................. 595 x 670 x 198 mm
Dimensions niche H x W ................ min. 840 x 865 mm
Weight .................................................................. 30 kg
Voltage / Frequency...................1/N/PE~ 230 V / 50 Hz
Air flow volume ...........................................20 - 15. 60 m³/h
Fan rating ........................................................ 8 - 15. 38 W
Sound pressure level ................................ 26 - 15. 48 db(A)
Heat recuperation from exhaust air ...............up to 70%

General guarantee conditions

Dear customer,
in guarantee case the country specified rights are valid
which you may claim directly towards your dealer.
29

Advertisement

Table of Contents
loading

Related Products for Olsberg 36/019-2

Table of Contents