Interior Light; Door Alarm (N64X, N64Xxx, N64Xim, N64Ximxx, N84X, N84Xxx, N84Xim, And N84Ximxx Models ); Moisture Reduction Heater; Temperature Control System - Norcold N62X Owner's Manual

Hide thumbs Also See for N62X:
Table of Contents

Advertisement

Available languages

Available languages

To operate the storage latch (see Art00991), open each door about 1/2 inch, hold the door
handle in the open position, and push the storage latch [55] into the cutout [56] of the strike
plate. Do not use the storage latch as a travel latch because the doors will not be fully closed.

Interior light:

The interior light is at the top of the fresh food compartment. It comes on when the
refrigerator is ON and the door is open. To replace the bulb:
1. Remove the DC power supply wires from the power board at the rear of the refrigerator.
2. To remove the cover [57] , push it toward the rear of the refrigerator (See Art00988).
3. Remove the light bulb [58] from the holder [59].
Use only a GE#214-2 bulb as the replacement bulb. This bulb is available
NOTICE
at most retail automotive parts centers.
4. Install the replacement bulb.
5. Install the cover.
6. Connect the DC power supply wires to the power board at the rear of the refrigerator.
Door alarm:
(N64X, N64XXX, N64XIM, N64XIMXX, N84X, N84XXX, N84XIM, and
N84XIMXX models)
The refrigerator has an alarm to alert you if the fresh food compartment door is not closed.
The refrigerator continues to operate, but if the fresh food compartment door is open and
the interior light remains on for two minutes:
- An audible alarm starts.
- "dr" appears in the center display.
- The interior light automatically turns off.
Close the door to silence the alarm.

Moisture reduction heater:

The refrigerator has a heater that prevents moisture from forming on the center divider between the doors of the freezer and the fresh
food compartment. The heater operates only when the refrigerator is ON and the DC power is sufficient.

Temperature control system:

Although the refrigerator is not frost -free, it is made to limit frost on the cooling fins. At regular intervals, the temperature control system
automatically melts most of the frost from the cooling fins. The water from the cooling fins drains into a collection cup that is attached
to the back of the refrigerator. The heat of the cooling system evaporates the water from the collection cup.

Backup operating system:

This refrigerator has a backup operating system. The backup operating system allows the refigerator to continue to cool if the
temperature sensor of the refrigerator should fail.
If this failure occurs:
- The refrigerator automatically changes to the backup operating system.
Owner's Manual 6
56
59
58
Art00988
55
Art00991
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents