Operating The Refrigerator Controls (N64X, N64Xxx, N64Xim, N64Ximxx, N84X, N84Xxx, N84Xim, And N84Ximxx Models); Control Panel; Automatic Mode Operation - Norcold N62X Owner's Manual

Operating the Refrigerator Controls
(N64X, N64XXX, N64XIM, N64XIMXX, N84X, N84XXX, N84XIM, and N84XIMXX models)

Control panel:

The refrigerator control panel (See Art01018) is between the
freezer compartment and the fresh food compartment. A 12 volt
DC power supply is necessary for the control functions of the
refrigerator to operate. The refrigerator receives DC power from
the 12 volt system of the vehicle; either an auxiliary battery, a
converter, or the vehicle engine battery.
The ON / OFF button [30] starts and shuts down the refrigerator:
- To turn on the refrigerator, push and release the ON / OFF
button.
- To turn off the refrigerator, push the ON / OFF button for one second and then release.
The TEMP SET button [32] controls the temperature adjustment of the freezer and the fresh food compartment. The temperature
adjustment that you select does not change if the operation mode of the refrigerator changes.
- Push the TEMP SET button and the temperature setting (the numbers "1-9") show in the center display [33].
- The number "9" is the coldest temperature setting.
- Push and hold the TEMP SET button and the temperature setting changes.
- Release the TEMP SET button when the temperature setting that you wish appears.
- After ten seconds, the temperature setting will go out and only a green power ON light remains.
The MODE button [31] controls the operation mode of the refrigerator:
- Push and hold the MODE button and each of the operating modes of the refrigerator show one at a time in the center display.
- There is one automatic mode of operation and two manual modes of operation.
NOTICE
On 3-way models, there are three manual modes of operation.
- When the mode of operation that you wish shows in the center display, release the MODE button.
If you should forget in what mode your refrigerator is operating, push and release the MODE button to show the
NOTICE
current mode of operation in the center display for 10 seconds.

Automatic mode operation:

When the refrigerator is in AUTO mode, it automatically uses the most efficient energy source that is available for operation. During
operation, if a more efficient energy source becomes available, the refrigerator controls change from the current energy source to the
more efficient energy source as follows:
- The first choice is AC operation if 120 volts AC is available to the refrigerator.
- The second choice is propane gas operation if 120 volts AC is not available to the refrigerator.
- The third choice is DC operation (on 3-way models only) if neither 120 volts AC nor propane gas is available to the refrigerator.
Owner's Manual 10
Art01018
1-COLD COLDEST-9
MODE ON-OFF
ON TEMP
SET
33 32 31 30