Partsidentification(Fig.1)
A Protective cap
B Main body
1 Battery cover
2 Power switch [0/1]
3 Attachment insertion part
C Filing attachment
D Decoration remover & cuticle care attachment
E Gel remover attachment
F Replacement gel remover seals (2 pieces)
Installingorreplacingthebattery
• Make sure the power switch is in the "0" position.
1. Rotate the battery cover in the direction of the
arrow, and align the marks. (Fig. 2)
2. Remove the battery cover. (Fig. 3)
3. Insert the battery. (Fig. 4)
• Be careful to insert the battery with + and ‑
correctly oriented.
4. Rotate the battery cover in the direction of the
arrow, and align the marks. (Fig. 5)
7