Panasonic ES-WC30 Operating Instructions Manual page 13

Surfacesmoothing
1. Buff the surface of the nail with
your own nail buffer (nail file).
Clean
Cleaningthemainbody(Fig.6)
Wipe with a dry cloth after use.
• Make sure the power switch is in the "0" position.
• When gel remover is adhered, dissolve a little hard
soap in water and immerse the cloth, then squeeze
out well and wipe clean.
Cleaningtheattachments
 Gelremoverattachment(Fig.7) 
Remove the filings using a make‑up brush with soft
bristles.
 Decorationremover&cuticlecareattachment 
(Fig.8)
Wipe with a dry cloth.
13