Operating Tips; Important Safety Notice - Stanley IntelliLaser Pro Instruction Manual

114C IM 14Aug06
Laser Plane
1. Laser plane in the stud detection mode is
always on, a laser plane icon is also shown on the
LCD. It can be turned off by pressing "
once.
2. Laser plane can also be turned on individually by
pressing "
turn it off.
3. The Laser plane will be auto - off after 1 hour.
4. The projected laser plane will coincide with
stud edge indicator.
5. The level vials are aligned to the laser plane.
When the bubble is centered, the laser plane
will be vertical/horizontal (depending on vial
used).

Operating Tips

IMPORTANT SAFETY NOTICE

Insure proper detection of live wires ALWAYS
hold the IntelliL L a a s s e e r r
only. Grasp between fingers and thumb while
maintaining contact with your palm.
8/14/06
Laser Aperture
" button once or pressing again to
™ P P r r o o in the handle area
–11–
7:40 PM Page 12
Vials
Illustration 13
" button