Charging The Module; Assembling Razrwire; Mounting The Module On Your Eyewear - Motorola 6809494A40-O Owner's Manual

Charging the Module

Important: Charge the Bluetooth module for 2.5 hours before using it the
first time.
To charge the module:
1 Plug the charger plug into a electrical wall outlet.
2 Open the rubber cover on the top part
of the module and plug the silver
side of the charger cable into the
charging port.
Be sure to align the plug correctly.
If the plug does not connect to the
module easily, try flipping it over and
re-inserting.
The indicator light on the module will
be solid red while it is charging.
3 When the indicator light turns off, charging is complete.
Note: With an optional USB Cable sold separately through Oakley dealers, you
can charge the module by plugging it into any computer USB port. That way, you
can leave the wall charger at home and use the USB Cable at the office, or
anywhere you have access to a computer.
Assembling
RAZRWIRE includes your Oakley eyewear and a Bluetooth module. Here's a
quick anatomy lesson of the module.
Charging
Port
Ear
Speaker
Multifunction
Button

Mounting the Module on your Eyewear

To mount the module on the right side of your eyewear
frames:
1 With the attachment clamp open, hold the module
in your right hand.
Note: If the clamp on your module is closed, gently
twist the clamp until it snaps open.
2 Hold the right arm of the frames in your left hand.
3 Drop the arm of the frame into the groove of the
attachment clamp.
4 Snap the top of the attachment clamp closed.
Note: If you need to mount the module on the left
side of the eyewear frames, see Mounting the
Module on the Left Side of your Eyewear on page 7.
Attachment
Clamp
Microphone
Volume
Indicator
Volume
Up
Light Down
Step 3
Step 4
™
R A ZR W I R E ™
3