Toyota 2005 Celica Owner's Manual page 71

For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—
1. Widen the slits of the seat cushion
slightly and confirm the position of
the lower anchorages near the but-
ton on the seat cushion.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the slits of the seat cushion
slightly and confirm the position of
the lower anchorages near the but-
ton on the seat cushion.
2. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
'05MY CELICA U (L/O 0409)
CAUTION
When using the lower anchorages
D
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages and
that the seat belt is not caught.
Push and pull the child restraint
D
system in different directions to
make sure it is secure. Follow all
the installation instructions
vided by its manufacturer.
Do not install a child restraint sys-
D
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in case of sud-
den braking or a collision.
pro-
2005 CELICA from Sep. '04 Prod. (OM20888U)
63