Toyota 2005 Celica Owner's Manual page 261

2. Unplug the connector. Remove the
rubber cover.
If the connector is tight, wiggle it.
'05MY CELICA U (L/O 0409)
3. Release the bulb retaining spring
and remove the bulb along with the
socket. Install a new bulb into the
socket and return the bulb retaining
spring to its original position.
To install a bulb, align the tabs of the
bulb with the cutout of the mounting hole.
4. Install the rubber cover with the
"TOP" mark upward, and fit it se-
curely on the boss. Plug in the con-
nector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2005 CELICA from Sep. '04 Prod. (OM20888U)
253