Operation; Turning The Appliance On; Air-Conditioning Mode; Dehumidifying Mode - Kenmore 35712 Instructions For Use Manual

TURNING THE APPLIANCE ON

Plug into the mains socket.
Two lines appear on the display indicating that the appliance is in stand-
by.
Press the ON/STAND-BY button (A). When turned on, the air conditioner
starts operating in the same mode as when it was turned off.
Press the MODE button (B) until the light corresponding to the required
mode lights up:
Light (Q)

: air-conditioning mode

Light (P)

: dehumidifying mode

Light (O) : fan mode
AIR-CONDITIONING MODE
Ideal for hot muggy weather when you need to cool and dehumidify the
room.
To set operation of the appliance correctly, press the + (E) or - (F) buttons
until the desired temperature is displayed.
Then select the fan speed by pressing the
responding to the required fan speed lights up:
the air conditioner operates at maximum to reach the required
temperature as rapidly as possible
reduces noise levels but still maintains a good level of comfort
for silent operation
AUTO: the appliance automatically selects the most suitable fan
speed in relation to the temperature set on the digital display.
The most suitable temperature for the room during the summer varies from
24 to 27°C. You are recommended, however, not to set a temperature
much below the outdoor temperature.
DEHUMIDIFYING MODE
Ideal for reducing humidity in spring and autumn, during rainy spells or in
damp rooms, etc.
In dehumidifying mode, the appliance must have the same configuration
as for the air conditioning mode, with the air exhaust hose fitted to the
appliance to allow air to be discharged externally.
When the dehumidifying mode is selected, the light (P) comes on and
" " appears on the display.
At the same time, the AUTO fan light (N) comes on. In this mode, other
speeds cannot be selected.
FAN MODE
Adjust fan speed by pressing the
conditioning mode.
In this mode, AUTO cannot be selected.
The fan speed selected will be displayed.
8

Operation

button (C) until the light cor-
button (C) as described for the air-