Step 2 - Opening The Housing - Ikelite 6184.99 Instruction Manual

STEP 1 - Initial Camera Setup
- In SETUP MENU -
Set camera Time Zone and Date.
In Monitor Settings, set Image Review to "ON."
Set Photo VR to "ON" and AF assist to "OFF." Set Digital Zoom to "OFF."
Set Auto Off to "5m."
Insert and format a memory card.
- RAISE the FLASH! Set
- Set Macro mode to "ON" when shooting close-up images. If the
image is overexposed, use "-"
away, zoom in, and then reshoot.
** All camera settings not listed should be set to the user's preference.
Adjust settings once underwater to accommodate your shooting situation.

STEP 2 - Opening the Housing

Lid Snaps have a Lock.
1. Push Lid Snap Locks
forward and lift as shown.
Open opposing Lid Snaps
simultaneously. Keep
pressure on the Lid Snaps
so they do not fly open
quickly.
Some Lid Snaps have a lot
of spring tension once they
go over center, so keep a
firm grip on each Lid Snap.
Lid Snaps may also be opened one at a time.
2. Remove the Housing Back.
8
:
Flash to
exposure compensation and/or back
Push Forward
Lift
- continued
"Standard Flash."
Lid
Snap
Lock