Entering The Water - Ikelite 6184.99 Instruction Manual

Entering the Water

As soon as you enter the water, take a moment and check to see that
the housing is properly sealed. We recommend you first water test the
housing with no camera inside to assure a safe and watertight
environment.
Next, check to see if there are any bubbles on the face of the lens port.
If there are, take your finger and remove them. If there are bubbles on
the lens port they can produce soft focus spots in your photos or video.
Recommended Accessories
External Color Correcting Filters
The specially formulated UR/Pro color
correcting filter 6441.46 for tropical blue water
settings enhances warm reds and oranges with
available sunlight up to 80 ft (24 m). Use in the
Caribbean, Indonesia, and any blue water
setting.
The UR/Pro color correcting filter 6441.86 for
green water enhances contrast and improves
the color of green water to give your subject a
rich, natural tone. Effective with available
sunlight up to 80 ft (24 m). Use in most lakes and any green water
setting. The color filters are for available light use only.
Not recommended when using external strobes.
Optional Tray with Release Handle 9523.63
The optional aluminum tray with release
handle comes with the necessary hardware to
mount to your Ikelite housing. To attach, see
page 16.
UR-Pro Filter
MADE IN USA
Lens Port
15