DETACHING THE STAND
Detaching the stand
Remove the screws highlighted then remove the stand base and neck from the rear of the TV set.
Securing the TV to a Wall
For your safety you can secure the TV to a wall using a fastening chord. With this method you can prevent
the TV from falling forward which could cause injury and/or damage to the TV.
A) Using one or both of the top wall-mounting
holes and screws (the screws are already supplied
in the wall mounting holes) fasten one end of the
fastening chord/s to the TV.
Note - Please ensure that children do not climb on the TV set.
10
Detaching the Stand / Securing the TV to a Wall
B) Secure the other end of the fastening chord/s to
your wall. (you will need screws/fi xings suitable for
your wall type - available separately from most
DIY stores)