Sending Multiple Images - Canon Ixus 285 HS User Manual

4
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([
the [ ] button.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
● To end the connection, press the
[ ] button, press the [ ][ ] buttons
on the confirmation screen to choose
[OK], and then press the [ ] button.
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 25) ► [
] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Target History] ► [Off].
● You can also send multiple images at once and change the image
size before sending ( = 105).
● You can send the current image by choosing [Send this image] on
the screen in step 4.
Image Sending Options
You can choose multiple images to send at once and change the image
recording pixel setting (size) before sending. Some Web services also
enable you to annotate the images you send.

Sending Multiple Images

]), and then press
On the image transfer screen, specify a range of images to send, or send
only images tagged as favorites.
][ ] buttons to
Selecting a Range
1
Choose [Select and send].
● On the image transfer screen, press the
[ ][ ] buttons to choose [Select and
send], and then press the [ ] button.
2
Choose a selection method.
● Press the [ ][ ] buttons to choose a
selection method.
1
Choose [Select Range].
● Following step 2 in "Sending Multiple
Images" ( = 105), choose [Select
Range] and press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
105