Using The Remote Access Feature - Motorola SD7581 User Manual

Using the Remote Access Feature

To access your answering machine from any touch-tone phone:
1. Dial your telephone number.
2. Enter your remote access code (preset to 123) after the outgoing
announcement plays and you hear the tone. The system announces the
available menu options:
•
Press 2 to play messages, press 2 again to stop
•
Press 0 while playing a message to erase
•
Press 1 to review
•
Press 3 to skip
•
Press 4 to turn off or on
•
Press 5 to record new memo
•
Press 7 to review menu again
3. Press the corresponding number key for the desired option.
4. Hang up to end the review session.
NOTE: If the answering machine is set to OFF, the system will answer on the tenth ring,
announce, "Answer off," and wait seven seconds for your security ID code. If no code is
entered, the system ends the call. You can turn on your system remotely by pressing "4" on
the keypad. If the memory is full, on the tenth ring, the system answers and announces,
"Memory full," and waits seven seconds for your security ID code.
33