Setting The Date And Time - Motorola MD790 Series User Manual

4 Select FORMAT to scroll through the formats. Stop at
the format you want to set for the area code, then
scroll down to move to the next area code.
5 Repeat steps 3 and 4 to store up to 4 more area
codes. When you are finished, select DONE.
6 Select EXIT to return to the standby screen, or
scroll to a different menu option.

Setting the Date and Time

1 Select MENU.
2 Scroll to Date/Time and select SELECT.
3 Enter the time. (two-digits are required for both
hour and minutes, so use a leading 0 for 1-digit
values.)
4 If using a 12-hour clock, select AM/PM to switch
between am and pm.
5 Scroll down to move the next field.
6 Select CHANGE to change the time format (12 or 24
hour clock). Scroll down to move to the next field.
7 Select CHANGE to select date format
(MM/DD or DD/MM).
8 Scroll down to move the next field.
9 Enter the current date. Set the day of the week on
the base unit (only) by pressing CHANGE to scroll to
desired listing.
10 Select DONE.
11 Select EXIT to return to the standby screen, or
scroll to a different menu option.
18