Toyota 2004 Sequoia Owner's Manual page 75

2. Pinch the two edges of the shoulder
seat belt for the third seat center
position with your fingers and slide
the belt past the slot of the guide as
shown above. At this time, the elas-
tic cord must be behind the seat
belt.
CAUTION
Make sure the belt is not twisted and
that it lies flat. The elastic cord must
be behind the belt and the guide
must be on the front.
04_SEQUOIA_U (L/O 0309)
3. Buckle, position and release the seat
belt. (For wearing the seat belt, see
"—Fastening front and rear
belts" on page 60 in this Section.)
Make sure the shoulder belt crosses
the shoulder.
REMOVING AND STORING
COMFORT GUIDE
seat
Pinch the two edges of the seat belt
together so that you can slide them out
of the guide. Pull the guide upward and
slide the guide with the elastic cord
into the pocket on the rear of the seat-
back of the third left seat as shown
above.
2004 SEQUOIA from Sep. '03 Prod. (OM34423U)
THE
67