Toyota 2004 Sequoia Owner's Manual page 399

—Headlights
1. Open the hood. Unplug the connec-
tor. Remove the rubber cover.
If the connector is tight, wiggle it.
04_SEQUOIA_U (L/O 0309)
2. Release the bulb retaining spring
and remove the bulb. Install a new
bulb and the bulb retaining spring.
To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.
"TOP PULL" mark
3. Install the rubber cover with the
"TOP PULL" mark upward, and fit it
securely on the boss. Then, plug in
the connector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
2004 SEQUOIA from Sep. '03 Prod. (OM34423U)
391