Call Screening; Remote Access - Motorola MD7260 User Manual

Call Screening

1. Set the base unit playback volume to a level greater than 1 to hear messages as they
are left.
2. Press the ON/FLASH button on the handset to stop recording and answer the call.
3. Set the volume level to 1 if you do not wish to hear incoming messages.
NOTE: The system will save the portion of the message recorded prior to you picking up
the call.

Remote Access

You can use many features of the answering system remotely from a touch-tone phone.
1. Dial your telephone number.
2. When the system answers, enter your remote access code (preset to 0000). The
system beeps once and announces the number of new messages on the system.
3. Enter a remote command (see Remote Access Commands) or press * to have the
system announce the menu.
34