Table of Contents
Advertisement
ATTACHING & REMOVING WINE BOTTLES
1.
Unscrew lower part of bottle fix nut and place it on the neck of desired wine bottle.
2.
Slide bottle upward, with gas and wine tube inside the bottle.
3.
Fit bottle mouth into silicon plug. If bottle mouth is larger, lift upper part of bottle fix nut to free
silicon plug completely and ease bottle mouth into the silicon plug first.
4.
Tighten lower part of bottle fix nut to the upper part.
5.
Press the dispensing button to allow wine out and check to see if gas leakage will occur.
(Reconnect tighter if needed so gas does not escape.)
6.
Place wine fully in refrigerated cabinet and close door.
Once the wine dispenser is positioned and plugged in, turn the power on.
DISPENSING WINE
The wine dispenser features two sets of two dispensing buttons, each positioned directly above its
corresponding wine bottle spout. The two dispensing button options are as follow:
Press and hold the
glass. Wine will continue to be dispensed until the button is released.
Press the
display "01"; press the
How to calibrate how much wine will dispense when
Function "H2" and "H3" lets users control the sensitivities of wine flow.
Press and hold down button
decrease the sensitivity range of the wine flow.
Press and hold down button
decrease the sensitivity range of the wine flow
For example, if "H2" is calibrated at "99" and "H3" is calibrated at "99", when
more wine will flow out compare to if "H2" is calibrated at "01" and "H3" is calibrated at "01", when
button is set to "01". Users can use functions "H2", "H3", and
much wine they want to dispense from their wine bottles.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
button over the desired spout to begin dispensing wine into your
button to dispense wine in desired increment. Press the
button again will display "02", and so forth, up to "04".
until "H2" is displayed. Use the up
until "H3" is displayed. Use the up
i n f o @ v i n o t e m p . c o m
button is pressed:
or
or
button to adjust and calibrate how
button 1 time will
button to increase or
button to increase or
button is set to "01",
9
Advertisement
Table of Contents
