Special Features; Intercom Calls - Motorola MD7151 User Manual

Special Features

If you have at least two handsets registered to your base unit, you can use the
intercom and call transferring features. Each handset is named HANDSETX. The X
represents the order (1, 2, 3, 4) in which the handset was registered to the base unit.
(See the user guide for the expansion handset for more information.)

Intercom Calls

1. When not on a call, press the
the display.
2. Enter the number of the handset you wish to page (e.g., to call HANDSET2, press
2).
3. Press
intercom call. The screen on both handsets displays
4. Press
NOTE: If a handset is out of range, or you receive an outside call while attempting an
intercom call, the screen displays
32
INT, ON/FLASH, v
, or any of the dial pad keys on HANDSET2 to answer the
or on either handset to end the call.
INT OFF/CANCEL
key on any handset.
INT
UNABLE TO CALL TRY AGAIN
appears on
ENTER HANDSET #
.
INTERCOM
.