Advertisement
1. General Safety and Operation Instruction
1. Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during
transit. Make sure any loose fittings, bolts, etc, are tightened before putting this product into
service.
2. This product is a part of a high pressure system and the following safety precautions must be
followed at all times along with any other existing safety rules.
3. Read all manuals included with this product carefully. Be thoroughly familiar with the controls and
the proper use of the equipment.
4. Only persons well acquainted with these rules of safe operation should be allowed to use the air
tool.
Do not exceed maximum operation pressure of the air tool (6.2BAR/90 PSI).
The air tool could explode and result in death or serious personal injury.
5. Do not exceed any pressure rating of any component in the system.
6. Disconnect the air tool from air supply before changing tools or attachments, servicing and
during non-operation.
7. Always wear safety glasses during operation.
8. Do not wear loose fitting clothing, scarves, or neck ties. Loose clothing may become caught in
moving parts and result serious personal injury.
9. Do not wear jewelry when operation any tool. Jewelry may become caught in moving parts and
result in serious personal injury.
10. Do not depress trigger when connecting the air supply hose.
11. Always use attachments designed for use with air powered tools.
Do not use damaged or worn attachments.
Do not use hand-tool sockets. Use impact-quality sockets only. Hand-tool socket are
"Glass-Hard" and will shatter and can cause serious personal injury if used with air tools.
12. Never trigger the tool when not applied to a work object. Attachments must be securely
attached. Loose attachments can cause serious injury.
13. Protect air lines from damage or puncture.
14. Never point an air tool at oneself or any other person. Serious injury could occur.
Revision date 10/2015
1
Advertisement
