NB: If, after installation, the printer still does not show 100% toner, check on the Report that the
"Firmware Version" is 1.18fix. If not, the Installation should be performed again.
G. OTHER IMPORTANT INFORMATION
Each time that you instal a remanufactured cartridge, it is advisable to reset the parameters in the printer
so that it starts with 0 pages and 100% toner.
To do the reset, repeat the step in F
Menu‐> 10.Maintenance ‐>Clear Settings ‐> All Settings ‐> OK
The capacity of the OEM cartridge is 2k copies @ 5%
If you fill with enough toner to do 3k copies, the printer will go to "TONER LOW" at approx 2k but will allow
printing to continue until toner is exhausted – you should make sure that the customer checks this very
regularly if he is using SCX‐4300 for FAX.
Samsung SCX‐4300 | Firmware Installation
4