Samsung SCX-4300 Installation Instructions page 3

Hide thumbs Also See for SCX-4300:

About 10 seconds later, the printer lights start flashing.

After another 2‐5 seconds, the printer control panel will show:

A) "PC TO DRAM IS OK" (If displayed PC TO DRAM IS NG, it means that the computer and the printer have

not communicated together successfully and you will need to check all the connections and start again)

B) FLASH IS ERASING

C) FLASH PROGRAMMING

Then the printer will automatically restart, the installation is complete.

Click "QUIT" to finish.

F. Final Verification

Once the installation is finished and the printer has finished warming up again, you must use the panel on

the printer as follows:

Go to MENU ‐> 10.Maintenance ‐> Clear settings ‐> All settings ‐> OK

Then printer light will flash, soon turning to normal GREEN light.

Print SYSTEM DATA LIST ( MENU ‐> 8. REPORT )

If it shows 100% toner, installation is successful.

Samsung SCX‐4300 | Firmware Installation