PUMP
Screw
Cap
(Remaining Hose)
HEATER
Washing
Heater
Ring Terminal
Nut
THERMISTOR
Thermistor
Bracket
Thermistor bulb
Pump Outlet Hose
Tub Pump Bellows
Remove pump outlet hose.
Remove tub pump bellows.
Remove cap (Remaining Hose).
Disconnect the wiring.
Three screws are unscrewed from the cabinet.
Remove the pump to arrow direction.
Loosen the nut.
Remove washing heater by pulling out.
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
36