PULLEY, MOTOR, DAMPER
Rotor
Bolt
Bolt
Friction
Damper
(PULLEY)
(MOTOR)
Hinge
(Damper)
(FRICTION DAMPER)
Remove the back cover.
After loosening the bolt, Rotor, pull out the
rotor.
Remove the 6 bolt from the stator.
Disconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR
Remove the bolts at the Tub.
The Hinge (Damper) at the base is pulled off
pressing on the snaps at the sharp end.
The hinge at the base is pulled off.
(To arrow direction)
35