Haier AW07LC2VHA Technical Overview page 47

Accessing the blower motor and condensate pump
A1. Disconnect power to the outdoor unit.
A2. Remove the louver assembly.
A3. Disconnect the main power wire to the indoor unit.
A4. Unplug the condensate pump and float switch from
wiring harness.
A5. Unplug fan motor from wiring harness.
A6. Remove ground wire from ground screw on electrical
box.
A7. Remove 5 screws holding foam condensate pan
bottom in place.
A8. Slide condensate pan from cassette.
Removing Fan Motor
RFM1. Remove holding nut from fan blade.
RFM2. Fan blade will slide off motor shaft.
RFM3. Remove Phillips head screw holding cover plate over
motor wiring leads.
RFM4. Remove 3 nuts that hold fan motor in place.
RFM5. Fan motor will come loose.
Removing Condensate Pump
RCP1. Remove screws holding condensate pump and float
switch in position.
RCP2. Disconnect condensate hose from condensate pump.
RCP3. Remove assembly.
CASSETTE UNIT TECHNICAL OVERVIEW
Cassette Unit Components
Louver
Assembly
A7. Image shows
screw locations
TECHNICAL OVERVIEW
Retainer
RFM 1
RFM 2
RFM 3
RFM 4
RFM 5
RCP 3
Condensate Tray
Mounting Screw
Fan
Nut
PAGE 47