Table of Contents
Advertisement
SHORELINE™ SURROUND ASSEMBLY INSTALLATION
Tools Needed: No tools are needed
One of the following surround kits is required (Purchased sepa-
rately).
Surround Kits
Models SHR33 & SHR40
Part/Cat. #
Description
75387
Small 3-sided Flange
75385
Small 4-sided Flange
75388
Large 3-sided Flange
75386
Large 4-sided Flange
Table 9
Note: Install surround with insert positioned in the fireplace, but a
few inches in front of its final location.
Figure 27
To Install Surround Panels:
1. Hang the surround on hooks attached to insert (labeled A and B).
Make sure the surround is seated firmly on the hooks. See Figures
28 and 29.
Figure 28
Dimensions
36-5/8"W x 25-7/8"H
36-5/8"W x 29-3/16"H
41"W x 28"H
41"W x 33-1/2"H
Hook A
Hook B
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE
Detail A
Detail B
See Detail A
Figure 29
2 Slide the insert into its final location in the fireplace. In case of uneven
wall surface open the right surround access door and make any
adjustments needed to ensure there is enough clearance to open the
access door (see Page 18).
Figure 30
Important Note: The trim panels or surrounds must not seal ventilation
openings on the appliance.
See Detail B
17
Advertisement
Table of Contents
