Regulations - Brother HL-2035 Quick Setup Manual

DO NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing
this may cause a fire or electrical shock. Refer to the User's Guide for how to clean the machine.

Regulations

Important
A shielded interface cable should be used in order to
ensure compliance with the limits for a Class B digital
device.
Changes or modifications not expressly approved by
Brother Industries, Ltd. could void the user's authority
to operate the equipment.
Radio interference (220-240 volt model only)
This printer follows EN55022 (CISPR Publication
22)/Class B.
Before you use this product, make sure that you use
the following interface cable.
1. A USB cable.
The cable must not be more than 2 meters long.
EC Declaration of Conformity
Safety Precautions
International ENERGY STAR
Statement
The purpose of the International ENERGY STAR
Program is to promote the development and
popularization of energy-efficient office equipment.
®
As an ENERGY STAR Partner, Brother Industries,
Ltd. has determined that this product meets the
®
ENERGY STAR guidelines for energy efficiency.
IEC 60825-1 specification (220 to 240 volt model
only)
This printer is a Class 1 laser product as defined in
IEC 60825-1 specifications. The label shown below is
attached in countries where it is needed.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
This printer has a Class 3B laser diode which
produces invisible laser radiation in the scanner unit.
You should not open the scanner unit under any
circumstances.
Varning
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
®
Compliance
®
5