Installing The Drum Unit And Toner Cartridge Assembly; Loading Paper In The Paper Tray - Brother HL-2035 Quick Setup Manual

2 Installing the drum unit and
toner cartridge assembly
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done when
installing the driver.
1
Open the front cover.
2
Unpack the drum unit and toner cartridge
assembly.
3
Rock it from side to side several times to
distribute the toner evenly inside the assembly.
4
Put the drum unit and toner cartridge assembly
into the printer.
5
Close the front cover of the printer.
Setting Up the Machine
3 Loading paper in the paper
tray
1
Pull the paper tray completely out of the printer.
2
While pressing the paper-guide release
lever (1), slide the paper guides to fit the paper
size you are using. Make sure that the guides
are firmly in the slots.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark (1).
5
Put the paper tray firmly back into the printer.
Make sure that it is completely inserted into the
printer.
1
1
11