Setting Configuration Menu Passwords - Konica Minolta magicolor 6100 User Manual

!
:
8 Remove the security key, and store it in a secure location.
After you exit from the menu and remove the security key, the Installation menu is
removed from the control panel message window.
9 Press the Online key to put the printer back on line.
5 
% ! 
$ !
 &
Once a menu is password protected, you can't enter the menu or make changes in it
until you enter a valid password.
» Note: Password protection does not prevent software commands from changing
functions.

If a password is required to enter the Operator Control or Administration menu,
the message window displays
ENTER PASSWORD
when you use the Select key to enter the menu. Enter the password, or press the
Menu key to return to the previous menu.

If you enter an invalid password , the message window flashes
INVALID PASSWORD
for three seconds and then returns you to the configuration menu.

If you forget the password , repeat the procedure in "Setting Configuration Menu
Passwords" on page 2-14.
"