Safety Notes - Kodak PIXPRO SP360 4K User Manual

Safety Notes

Product Notes:
• Do not disassemble or attempt to repair the product by yourself.
• Do handle the product properly. This product may be damaged if dropped, punctured or crushed.
• Avoid directly touching the lens element, please use professional lens cleaning paper together with lens cleaning agents to wipe the lens and keep the lens clean.
• Do not use corrosive, alcoholic or organic-solvent-containing cleaners to wipe this product.
• Do not use or store this product in high temperature environment.
• Do not expose the lens to strong light sources (e.g. daylight, etc.) for extended periods.
• Do not use or store the product in a strong magnetic field environment.
• If the product is quickly transferred from a low temperature environment to a high temperature environment, water condensation may occur in the product due to
physical changes. In this case, it is recommended to wait until the product returns to room temperature before you turn it on.
• If a photo or video cannot be played back due to improper operation by the user, the Company shall assume no liability or responsibility for compensation.
• Store the product in a dry and clean environment when you are going to store the product for a long period.
• According to the characteristics of the electronic elements of the camera, the temperature of the camera will rise (heat is emitted) in the use process. Even though the
temperature is relatively high when heat is emitted from the surface of the camera, the camera is capable of shooting continuously without faults. When the camera
detects that the temperature of the body is within certain temperature limitation, it will power off automatically.
• In case of power off due to the temperature limitation, the camera can be activated for shooting again after its temperature drops.
Battery Notes:
• Please use a battery that is the same type as the one included.
• If the battery overheats during charging or use, stop charging or use immediately. Turn off the product, remove the battery carefully, and wait until it cools down.
• Please keep the battery contacts clean and dry.
• Please install the battery according to the positive and negative markings on the battery compartment. Never force it into the battery compartment.
• If battery fluid leaks into the product, please contact your retailer. If battery fluid leaks onto your skin, rinse your skin immediately with clean water and seek for medical
attention.
• To prevent the battery from being damaged, do not drop the battery, hit it with heavy objects or scratch it with sharp objects.
• Do not let the battery be in contact with metal objects (including coins) in order to avoid short-circuiting, discharging, excessive heating, or possible leakage.
• Do not heat the battery or throw it into a fire in order to avoid a possible explosion.
• Remove the battery if it will be stored for a long period.
• Do not store the battery in high temperature environment.
• Using the battery in cold environment will result in a much lower performance.
• Do not attempt to disassemble the battery by yourself.
• Please dispose the battery properly according to local laws and regulations (national or regional).
Memory Card Notes:
• The memory card referred to in this manual is a microSD card, microSDHC card or microSDXC card.
• Please keep the memory card clean and dry.
• When inserting a memory card, make sure the notch direction of the card matches the notch direction of the memory card mark near the card slot. Do not force the
5