Yamaha YZ125 2009 Owner's Service Manual page 51

1. Master cylinder
2. Brake hose holder
3. Brake hose
A. Install the brake hose so that its pipe por-
tion directs as shown and lightly touches
the projection on the caliper.
B. Pass the brake hose into the brake hose
holders.
C. If the brake hose contacts the spring (rear
shock absorber), correct its twist.
D. Install the brake hose so that its pipe por-
tion directs as shown and lightly touches
the projection on the master cylinder.
CABLE ROUTING DIAGRAM
2-20