Yamaha YZ125 2009 Owner's Service Manual page 115

3. Install:
• Lock washer "1"
• Nut (clutch boss) "2"
Nut (clutch boss):
80 Nm (8.0 m•kg, 58 ft•lb)
Use the clutch holding tool "3" to hold the clutch
boss.
Clutch holding tool:
YM-91042/90890-04086
A. For USA and CDN
B. Except for USA and CDN
4. Bend the lock washer "1" tab.
5. Install:
• Friction plate "1"
• Clutch plate "2"
• Install the clutch plates and friction plates al-
ternately on the clutch boss, starting with a
friction plate and ending with a friction plate.
• Apply the transmission oil on the friction
plates and clutch plates.
6. Install:
• Bearing "1"
• Washer "2"
• Circlip "3"
To push rod 1 "4".
Apply the lithium soap base grease on the
bearing and washer.
7. Install:
• Push rod 2 "1"
• Ball "2"
• Push rod 1 "3"
Apply the transmission oil on the push rod 1, 2
and ball.
4-32
CLUTCH