Table of Contents
Advertisement
unreliable.
From the main menu highlight the Advanced CMOS Setup option
and press <ENTER>. Press any key to clear the warning screen.
The following chart lists card settings which you can change in
Advanced CMOS Setup. It lists the default value for each setting.
This screen has several help screens, accessed by pressing the
<F1> key, which display setting options.
Feature
Type Rate Programming
Type Rate Delay (msec)
1000
Type Rate (Chars/sec)
20,
Above 1MB Memory Test
Memory Test Tick Sound
Memory Parity Error Check
Hit <DEL> Message Display
Hard Disk Type 47 RAM Area
This setting determines where in memory the hard disk infor-
mation is stored when you select hard disk type 47. If you
disable BIOS Shadow RAM, the Hard Disk Type 47 parameter
table will use regular RAM. There are two options, 0:300 (lower
system RAM) and DOS 1 KB (the top 1KB of 640 KB base
memory).
Wait for <F1> if Any Error
System Bootup Num Lock
Available options
Disabled (default)
Enabled
250, 500 (default), 750,
6, 8, 10, 12, 15 (default),
24, 30
Disabled (default)
Enabled
Enabled (default)
Disabled
Enabled (default)
Disabled
Enabled (default)
Disabled
0:300 (default)
DOS 1KB
Enabled (default)
Disabled
On (default)
Off
Chapter 5 BIOS diagnostics and setup
33
Advertisement
Table of Contents
