Adjusting Heating
To adjust the heating temperature, enter the main screen by touching
S
anywhere on the control.
With the system in either AUTO or HEAT mode, use the Up (Y) and
S
Down (B) buttons to set the desired temperature.
On the left hand side of the screen, the comfort profile will switch to
S
manual, and the system will be placed in a temporary hold.
Use the Up (Y) and Down (B) buttons to change the time to temporar-
S
ily hold the desired temperature in 15 minute increments.
When the correct time interval is displayed, touch DONE.
S
To return to the scheduled program, touch HOLD UNTIL, and then
S
select PER SCHEDULE.
Adjusting Cooling
To adjust the cooling temperature, enter the main screen by touching
S
anywhere on the control.
With the system in either AUTO or COOL mode, use the Up (Y) and
S
Down (B) buttons to set the desired temperature.
On the left hand side of the screen, the comfort profile will switch to
S
manual, and the system will be placed in a temporary hold.
Use the Up (Y) and Down (B) buttons to change the time to temporar-
S
ily hold the desired temperature in 15 minute increments.
When the correct time interval is displayed, touch DONE.
S
To return to the scheduled program, touch HOLD UNTIL, and then
S
select PER SCHEDULE.
Adjust Temperature (Permanent Hold)
The Evolution Connex Control allows you to permanently override your
programmed schedule by adjusting the indoor temperature at any time to meet your
needs.
7