Configuring Switch Settings (Advanced); Event; Configuring Motion Detection - Lorex LNR110 Series Instruction Manual

13 Using the Main Menu

13.3.6 Configuring Switch Settings (Advanced)

You can configure the networking settings for the internal PoE switch.
CAUTION
It is recommended to leave this menu on the default settings. Changing the information in this menu may
disrupt the connection to the cameras.
To configure switch settings:
1. From live view, right-click and select Main Menu.
2. Click >Network>Switch.
3. Configure the IP Address, Subnet Mask, and Gateway for the internal PoE switch.
4. Click OK. Click Save to save changes. The system will restart.

13.3.7 Event

The Event menu allows you to configure settings for motion detection, video loss, and sys-
tem warnings.

13.3.8 Configuring Motion Detection

Motion Detection events allow the system to mark footage that has motion. This allows
you to quickly locate relevant footage through Search. You can also configure system re-
sponses to motion detection events, such as activating the system buzzer or sending an
email alert.
To configure Motion Detection events:
1. From the Main Menu, click
#LX400070; r. 1.0/27147/27147; en-US
and then click Event>Motion>Motion Detect.
59