Sony KDF-60XBR950 Service Manual page 258

Using i.LINK
82
Notes on Using This Connection
To Do This ... Do This ...
Set up a digital i.LINK For digital i.LINK devices (devices that require only the
device i.LINK connection), no setup is necessary. The LCD
projection TV automatically recognizes the device as soon
as the connection is made.
❏
Set up an i.LINK
device that supports an
EIA-775A analog
❏
connection
Notes on Connecting i.LINK Devices
To connect two or more i.LINK devices, use i.LINK cables to connect them
as shown below.
A B
i.LINK
You can connect up to 63 i.LINK devices. However, the maximum number
of cables in any serial route is 16.
A B
i.LINK
Do not connect i.LINK devices in a way that creates a loop.
A
Connecting non-compatible devices, such as PCs or PC peripherals, may
result in malfunctions.
Connect analog A/V cables to the VIDEO 3
input (see page 81).
Use the i.LINK Control Panel to activate the
analog connection to your i.LINK device (see
page 86).
C
i.LINK i.LINK
C
i.LINK i.LINK
F
i.LINK i.LINK
i.LINK
B
i.LINK i.LINK
D E
i.LINK
D E
i.LINK
G
C