Aiwa XH-N5 Service Manual page 39

Pin Name
Pin No.
58 P27/DNR
59 P26/CST2
60 P25/REB
61 P24/CAM2
62 P23/AUTO2
63 P22/REA
64 ~ 71 P21 ~ P14
72 VDD4
73 ~ 84 P13 ~ P2
85 O-KEY SCAN
86 MOTOR
87 O-POWER
88 SOL2
89 VSS2
90 VDD2
91 DISH-RVS
92 DISH-FWD
93 OPEN
94 CLOSE
95 I-RDS-DATA/
CD-DATA
96 CD-CE
97 CD-CLK
98 I-DISH
99 I-IFC/CD-SUB Q
100 I-STEREO/I-DRF
I/O
O/I FL segment output P27 / Dolby Noise Reduction diode detect (Not used).
O/I FL segment output P26 / DECK2 cassette detect switch data input.
O/I FL segment output P25 / DECK2 side-B record OK switch data input.
O/I FL segment output P24 / DECK2 CAM switch data input.
O/I FL segment output P23 / DECK2 AUTO STOP switch data input.
O/I FL segment output P22 / DECK2 side A record OK switch data input.
O FL segment output P21 ~ P14.
- Power supply input.
O FL segment output P8 ~ P1.
O Switch scan timing output.
O DECK MOTOR ON/OFF output.
O System power supply ON/OFF output.
O DECK2 solenoid output.
- GND.
- Power supply input.
O CD turntable reverse rotation output.
O CD turntable forward rotation output.
O CD tray open output.
O CD tray close output.
I/O RDS data input (Not used) / CD IC control data output.
O CD chip enable output.
O CD IC control clock output.
I CD dish position input.
I IF count input / CD SUB-Q input.
I Stereo detect input / CD DRF input.
Description
– 40 –