White-Westinghouse WRTG213MBJW Instruction Manual page 15

firmly installed.
Proper leveling prevents movement,
vibration and other problems.
Do not substitute the original
refrigerator feet.
Wait at least 2 hours before plugging
the refrigerator in this will prevent
operating problems.
Electrical installation
Before turning on the refrigerator,
check to see if the voltage of the outlet
to be used is the same as that
indicated on the tag located close to
the plug (along the power cord) or on
the refrigerator's identification label.
Check to see that the refrigerator's
plug is not connected on top of the
power cord.
Connect the refrigerator to its own
outlet. Do not use an extension cord
or adaptor plug.
For your safety, ask an electrician to
verify the condition of the electric
wiring in the area where the
refrigerator will be installed.
The wires leading to the outlet into
which the refrigerator will be plugged
should be made of copper and be at
least 2.5 mm2 wide. For greater safety,
consult the legislation on electrical
installations in your country.
Grounding
The power cord has a three-pronged
grounded plug for your personal
safety. It must be connected to a
grounding type wall receptacle, in
Installation
27
accordance with the legislation
governing electric installations in your
country, as well as any local regulations.
Do not remove the grounding prong, do
not use a two pronged adaptor, and
never make a connection to the
schematic. Use the cord supplied with
the equipment (do not change it). If the
cord is damaged, it must be immediately
replaced by specialized personnel.
Attention
For your safety, installation must be
grounded. If it is not grounded, it
must be adapted for this by
specialized personnel.
Installation
28