Postavljanje U/I Ploče; Procedure; Post-Requisites - Dell Inspiron 11 3000 series Service Manual

Postavljanje U/I ploče
UPOZORENJE: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the I/O-board cable into the connector on the I/O board and close
the latch to secure the cable.
2 Slide the ports on the I/O board into the slots on the base cover and snap
the I/O board into place.
3 Align the screw hole on the I/O board with the screw hole on the base
cover and replace the screw.
4 Slide the I/O-board cable into the connector on the system board and
close the latch to secure the cable.

Post-requisites

1 Replace the battery.
2 Follow the procedure from step 2 to step 5 in
computer. After working inside your
After working inside your
"Replacing the base cover".
25