Postavljanje Matične Ploče; Procedure; Post-Requisites - Dell Inspiron 11 3000 series Service Manual

Postavljanje matične ploče
UPOZORENJE: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
NAPOMENA: Your computer's Service Tag is stored in the system board.
You must enter the Service Tag in the BIOS setup program after you
replace the system board.
NAPOMENA: Replacing the system board removes any changes you
have made to the BIOS using the BIOS setup program. You must make
the desired changes again after you replace the system board.

Procedure

1 Align the screw holes on the system board with the screw holes on the
palm rest and keyboard assembly.
2 Replace the screw that secures the system board to the palm rest and
keyboard assembly.
3 Slide the touch-pad cable and keyboard cable into their connectors and
close the latches to secure the cables.
4 Connect the power-adapter port cable, speaker cable, and coin-cell
battery cable to their connectors on the system board.
5 Slide the display cable into the connector on the system board and close
the latch to secure the cable.
6 Slide the display-cable bracket into the slot on the palm rest and
keyboard assembly.
7 Align the screw hole on the display-cable bracket with the screw hole on
the system board.
8 Replace the screw that secures the display-cable bracket to the system
board.

Post-requisites

1 Replace the hard
computer. After working inside your
drive.
After working inside your
63