Monitoring Phone Use - Motorola V291 Start Here Manual

• Long sends each tone for as long as you press the
key. Some systems (such as home answering
machines) require long tones for proper activation.
Sending DTMF Tones
Using the Keypad
Press the number keys to send the numbers as DTMF
tones during a call.
To send numbers as long tones, make sure that DTMF is
set to Long . During a call, enter any single short keypress
to set the phone to DTMF mode, then send the required
numbers by pressing and holding each key in turn.

Monitoring Phone Use

View and Reset Call Timers
signals and ringing.
The amount of network connection time you track on your
resettable timer may not equal the amount of time for which you
are billed by your service provider. For billing information, please
contact your service provider directly.
To view a call timer:
Find the Feature
94
Network connection time is the elapsed time
from the moment you connect to your service
provider's network to the moment you end the
call by pressing
O
. This time includes busy
M
> More > Recent Calls
> Call Times