Front Panel Features - Xpress A100 User Manual

Front Panel Features

This is the stuff on the front panel...
1. POWER LED - One, green LED. Green LED illuminates when the A100 is connected to AC
power and turned ON.
2. PHASE - The Phase setting allows compensation for subwoofer location relative to the
main speakers. Adjust the Phase setting to the point of highest sub audio output.
RANGE: 0º to 180º.
3. CROSSOVER - The Crossover sets the frequency at which audio content will pass to the
A100 Speaker Out.
RANGE: 40Hz to 160Hz.
4. BOOST - One, slide switch. Set to 0dB for normal signal. Set to 6dB for 6dB boost @ 40Hz.
5. VOLUME - Adjusts the A100 audio output level to the connected subwoofer.
RANGE: MIN (OFF) to MAX (Eyeballs bouncing around in eye sockets.)
1 2
PHASE CROSSOVER
POWER
3 4
BOOST
6
5
VOLUME