Replacing The Optical Drive; Procedure; Post-Requisites - Dell Inspiron 3656 Service Manual

Replacing the optical drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align and snap the optical-drive bezel to the optical drive.
2 Align the screw holes on the optical-drive bracket with the screw holes
on the optical drive.
3 Replace the screws that secure the optical-drive bracket to the optical
drive.
4 Slide the optical-drive module into the optical-drive bay through the
front of the chassis.
5 Replace the screw that secures the optical-drive assembly to the chassis.
6 Open the side-chassis.
7 Connect the data cable and the power cable to the optical drive.
8 Connect the data cable and the power cable to the hard drive.
9 Close the side-chassis.

Post-requisites

1 Replace the
2 Replace the
44
front bezel.
computer cover.
computer. After working inside your
After working inside your