TO INSTALL AND REPLACE BATTERIES INTO THE PROJECTION
CLOCK
The Projection clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
In addition or instead of inserting batteries, the AC adapter can be used:
1.
Connect the power adapter to a wall socket
2.
Insert the adapter into the jack at the bottom of the clock
1.
Insert finger or other solid object in the
space at the bottom center of the battery
compartment and lift up to remove the
cover.
2.
Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.
42