YORKVILLE YCV40/T Service Manual page 18

PRODUCTION NOTES
1. RTV MUST BE ADDED TO THE FOLLOWING CAPS
C1,C16,C19,C17,C70 BETWEEN C84,C28,C60,C15
BETWEEN C49,C50, ADDED TO C15,C7,C8,C3,C9
C56,C14,C6,C10,C4,C2 AND C12
2. C53 IS 22N FOR BOTH NORTH AMERICA AND CE
3. C3,C7,C6 MUST BE LOW PROFILE PT#5631
4. C8,C9 MUST BE LOW PROFILE PT#5879
5. BIAS 350mV ACROSS R91 AND 350mV
ACROSS R92
3796 on this
device only.
Lots of goop
on the thermistor.
SEE LAYOUT DOCUMENTATION
Z352-MTG
Z352
2 of 8701
2 of 3850
2 of 8832
- to hold z352 in place
PCB
2 of 8741
6. BEND C69 OVER Q7 AS FAR AS POSSIBLE BEFORE
ADDING RTV
7. PCBSA: BREAK OUT BOARD BEFORE TESTING