AT&T Plug&Share 6800G User Manual page 58

Configuring the Wireless Network — Windows
Windows XP • Windows 2000
® ®
AT&T Plug&Share 54 Mbps Wireless Router 6800G
™
2000
®
• Windows Me/98 SE
®
Step 9
When configuration is complete, you must
re-start Windows .
®
When Windows restarts you will be prompted
®
to enter a user name and password. Be sure
to record these in a safe place. You will be
required to enter them for access to the
network each time you restart Windows
Step 10
To verify that configuration is complete, double-
click the My Network Places icon on your
desktop, then double-click Computers Near Me.
In the next window displayed you should see
the names of all network computers.
If any computers do not appear, you will have to
follow the steps in this section on each computer
to configure them for network sharing. Make
sure each computer is assigned a different
name, and all share the same Workgroup name
you entered at Step 8.
.
®
58