Table of Contents
Advertisement
Recording
Use normal position tapes.
High position and metal position tapes can be used, but the unit
will not be able to record or erase them correctly.
Preparation:
1. Wind up the leader tape so recording can begin immediately.
2. Press [TAPE, w q] and then [g, STOP].
1
Press deck 2 [;, OPEN] on the main unit and
insert the cassette to be recorded.
The tape direction is automatically set to F q.
2
Press and hold [PLAY MODE] to select the
reverse mode.
One side only records.
v
Both sides record (forward
/, $
While recording, if a track is cut off in the middle
at the end of the front side, it is re-recorded from
the beginning on the reverse side.
At the end of the reverse side, recording stops
and the current track will be interrupted.
• "$" automatically changes to " /" when you start
recording.
3
Select the source to be recorded.
Radio
Tune to the required station. (
1
Insert the disc(s) you want to record.
2
Press [DVD/CD q] and then [g, STOP]
Disc(s)
•
Recording specific disc(s) or tracks
Program the tracks (
1
Press [TAPE w q] and then [g, STOP]
Tape
2
Press deck 1 [;, OPEN] on the main unit and
insert the cassette you want to record.
Music
Using the Music Port, page 31
➡
Port
4
Press [*, RECORD] on the main unit to start
recording.
•
To stop recording
Press [g, STOP].
•
If the tape finishes before the disc
The disc continues playing. Press [g, STOP] to stop it.
Note
•
Multi-channel sources are automatically down-mixed to 2
channels during recording.
•
The volume, sound field and quality have no effect on
recording.
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording
with the other.
(
➡
page 24)
reverse)
The radio, page 23)
➡
Program play, page 14)
➡
Erasure prevention
Use a screwdriver or similar object to break out the tab.
Side A
Tab for side B Tab for side A
To record on the tape again, cover the hole with adhesive tape.
Adhesive tape
Erasing recordings
1
Press [TAPE w q] and then [g, STOP].
2
Eject the tape (if any) from deck 1.
3
Insert the recorded tape into deck 2.
4
Press and hold [PLAY MODE] to select the
reverse mode.
5
Press [*, RECORD] on the main unit.
25
Hide quick links:
Advertisement
Table of Contents
